14 results in 0.0196 seconds.
-
Ricoh DD 3334 Not ejecting masters
I got a Ricoh DD3334 not ejecting master correctly. The clamp opens but the master does not fall all the way out to be picked off by the master eject... -
C353/FS-519 problems ejecting sorter exit consistantly.
In group mode finishing, or on longer runs in general the exit section just doesn't want to eject the stacks. No pattern to it, cleaned the exit rollers... -
bh c451 with fs-519 jamming at exit
I have a fs-519 finisher and it will randomly not kick the paper all the way out befor the nex pages get there.
on a 20 page job it stacks 5 and... -
IR7086 finisher code E578 after tray switching
After copying until the finisher tray B is full, the next set starts to exit onto Tray B(about 3-4 sheets), mid-set it stops ejecting sheets and begins... -
Taskalfa toner and what your doing about it.
just like most of you and your taskalfa machines the toner levels are not lasting as many prints as they say it should, as a dealership how are you coping... -
sharp ar-m550
paper ejecting to far out of finisher,not stapling all the pages. not jamming.no codes.cleaned everything...stumped. -
konicaminolta c452
Hello, I have a problem with a Konica C452 and its finisher attack. All prints come with clear signs embossed on the card. Touching the paper with your... -
CS-400ci Jamming at Eject
We have a CS-400ci jamming when ejecting into the finisher. We go out and can't repeat the jam, but it shows in counts. The thing I am curious about is... -
Bizhub C300 + FS-514 Finisher + MT-501 Mailbox
Hi CopyTech Experts,
i have a problem with a Bizhub C300 and a FS-514 Finisher.
If the FS-514 is not connected, the C300 all... -
Savin C3030 Jaming only on faxes
OK this is the strangest thing I've ever seen. This machine jams only on faxes. When it does jam the paper is coming out of the exit and then there is... -
iR C3380 & Z1 finisher paper feed issue
OK, this is a weird one - I have a C3380 with the Z1 inner finisher, and as each sheet of paper is exiting the feed path(before it is either ejected,... -
KM-4230 and F-4330 Maintenance Menu and IR sensor
Howdy everybody, this may be a lengthy post, but I believe in full disclosure when it comes to technical problems :P
I've got a Kyocera KM-4230... -
Duplo DP220Le problem
How do adjust master timing? We work mainly on Ricoh (but only 1 or 2).
As it is ejecting the old master it is already trying to feed the new master.... -
fn602 on b600
all documents from stacker and single sheet bin comes out half way. irrespective when 1 or more than 1 copy is made..it is not ejecting properly..pls...
