If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Yet another 1st time poster begging for something, like it's owed to him.
Is this not a place for techs to get help and to help one another. ?Their are a lot of little guys or independents trying to make ends meet. So what is the problem of someone asking for help?
I didn't get the feeling that the poster felt he was entitled to something. He's desperate and asking for help.
I took a look at your posts and all you ever do is peddle other peoples copyrighted and patented works for your gain or run people down into the ground.
How long are you going to use the excuse I am holy-er than thou because I pay to advertise on the site? Obviously you don't pay enough if they need donations all the time or maybe you cause too many people to leave the site so advertising revenues are down.
Congratulations, you support copytechnet with your illegally illgotten gains. It will be funny when the feds shut down copytechnet like they do sites like napster and kazaa; or bring you and the site administrators up on RICO charges.
Originally posted by manuals4you
Yet another 1st time poster begging for something, like it's owed to him.
See things work ass backwards from logic around here. If you were like me, you had a problem, and needed a solution on a machine. So you google searched and wound up on copytechnet looking for help only to find a lot of people not wanting to give it right away. So right now you are a "needer" rather than a "giver."
But basically the "needers" are what drive this site because if most people didn't have a need then they'd never have found or bothered looking for or stumbling upon this site. So you're supposed to somehow forget about your technical issue for a while or hope someone will help you...all the while your problem is still a problem.
BTW, out of all the forums I belong too, this is the only one like it. All others allow the free flow of information whereas this one at times is akin to communist china.
I do not see and does not promise I'll give to someone sst or firmware. But many here already helped to get the firmware, as a friend of Iraq too technical. I think you can not trust everyone, but many people here are serious committed to help solve problems, after all technical and equal anywhere in the world have difficulties in getting information and only with hard work can reap good fruit. Good job to all.thanks .
Private message sent to me by manuals4you, I have changed the bad words partially with ***:
" SST
I am a paid supporter of this forum and I have been since it's inception. I can post what the f**k I want and there's not a d**n thing you can do about it. Keep your comments to yourself As**ole!
"
Forum administrators can verify that I've received that PM.
This forum is no longer peaceful, mutually offense each other, especially thread related with smal progie like SST, firmware. time to move to another forum,
this word is really bad "I can post what the f**k I want and there's not a d**n thing you can do about it" Knowledge is not given like a tree that does not bear fruit
First off all techcat my company has purchased several manuals from manuals4you, secondly do you get kickbacks from manuals 4you is that why are commenting on there behalf
I don't get kickbacks from anyone in here/
my comments are not on his/or her behalf
buying manuals from a seller is not support/ it's your choice
because u purchase something from someone or someplace does not mean u support them
First off all techcat my company has purchased several manuals from manuals4you, secondly do you get kickbacks from manuals 4you is that why are commenting on there behalf
Originally posted by teckat
where is your support with four posts since 2010 ???
Leave a comment:
Guest replied
Re: Canon service support tool
Private message sent to me by manuals4you, I have changed the bad words partially with ***:
" SST
I am a paid supporter of this forum and I have been since it's inception. I can post what the f**k I want and there's not a d**n thing you can do about it. Keep your comments to yourself As**ole!
"
Forum administrators can verify that I've received that PM.
I also agree with you guys i have supported these guys in the past but no more there just a bunch of money grabbing people
Originally posted by creppy
I Agree with you marcelcorzo..., "many newbies become expert forists in sometime, and they',ll remember they were helped, so they'll give it back the favour. So newbies are in the right place. manuals4you is in the wrong place"
Leave a comment: