-
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
-
Last edited by blazebusiness; 07-22-2021, 04:26 PM.sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.comComment
-
Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...Comment
-
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.Comment
-
Re: Konica Software Switch settings (complete)
Just had a second-hand C308, that every time I did anything in the Utility Mode I had to put the admin password in and after some digging came across this.
Password Protect The Utility Button
It is now possible to password protect the Utility Button on the Main Screen of the MFP.
This is useful in Multi User Environments to prevent unauthorised access to Utility, User Settings, Device Information, One Touch/ User Box Registration, Consumable Life, Banner Printing, Remote Panel Operation and so on.
With this set, the User will be prompted for a password when pressing the Utility Button - (The Password is the same as the Password used to access the Admin Mode).
Setting Procedure:
Access Tech Rep / System 2 / Software SW Setting:
Password protect access to Utility mode.
Software SW No.200 Hex 00 : Disabled (default)
Software SW No.200 Hex 20 : Enabled
This SW is available for the following models:
- All A3 "E series" devices (Must be on latest Firmware and Function Version)
- All A3 7 and 8 Series Devices
**Note - None e series devices are NOT supported**
Related Topic: Password protect the User Settings Menu
Should you wish to just protect the User Settings Menu, this can be done by setting SW 71 to Hex 08
Comment
-
Re: Konica Software Switch settings (complete)
What's switch 219 hex 08 do?
Sent from my Pixel 4 XL using TapatalkComment
-
Re: Konica Software Switch settings (complete)
KM support told me to use hex 08 for a fault but didnt say what it did. hex def goes past 04 consider function versions goes as far as B0Comment
-
Re: Konica Software Switch settings (complete)
Software SW No.219 0x00: SMB1.0/2.0 are available. (default)
Software SW No.219 0x04: Only SMB2.0 is available.
change ntlm to smb 2 as well.
hex 08 is not a valid option.We know a thing or two because we've seen a thing or two.
The medication helps though...Comment
-
Re: Konica Software Switch settings (complete)
Software SW No.219 0x08: Support for DHCP option 81
- DHCP option 81RFC4702
Comment
-
Re: Konica Software Switch settings (complete)
Ok thanks, yes it's a DNS issue regarding email only working on IP not hostname so the advise makes sense
Sent from my Pixel 4 XL using TapatalkComment
-
Re: Konica Software Switch settings (complete)
Since I like my data in of Excel spreadsheets, I've gathered this information into a searchable .xlsx file ... if anyone is interested in the file. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment