Konica c224 e can't access service mode

[jotunn]

Dear jotunn
Kindly, your help is needed.
I have the same problem with my Bizhub C250i CE Password.
Can you help please...????
Information you need, as follow:

Reset code for your machine:
MFP Serial Number AA2M021006418
Reset Code 3WSNA-AQGPQ-9M83S-GETQY-BTZWP-GG8YD-ENJQG-8ZDHR

If you wish, you can support me:

https://www.paypal.com/ncp/payment/M5LQ2TNC5MWVS

--
Regards

[Dev_nos]

Dear jotunn
Kindly, your help is needed.
I have the same problem with my Bizhub C250i CE Password.
Can you help please...????
Information you need, as follow:

SN: AA2M021006418
MAC Address: 00:20:6B:43:2D:3A
CE Passw. Res. Req. Code: RLTTN-AT5UJ-JLJJB-9U6X4-7KJN2-9G8YD-ENJQG-8ZDFJ

[jotunn]

Dear Jotunn
Please can you help me with the reset code for a bizhub C3350i, someone changed the password to access the service mode.
MFP SERIAL NUMBER: A93E021447533
MAC: 00:20:6B:4D:5A:B5
REQUEST CODE: DS5YA-KNXJH-W82B8-GS38D-6N7P6-9G8YD-CNZRG-8YDL7

Thank you so much

Please review carefully the data you have posted. Check for typos etc.

--
Regards

[jotunn]

Hi jotunn ,
can you help me please? departing employee change the ce password
please help me with a reset. Thanks!

Payment link for bringing your machine back to life:

https://www.paypal.com/ncp/payment/SJZ64UU9KA4R4

The reset code will be sent after payment.

--
Regards

[oscarbiz]

Dear Jotunn
Please can you help me with the reset code for a bizhub C3350i, someone changed the password to access the service mode.
MFP SERIAL NUMBER: A93E021447533
MAC: 00:20:6B:4D:5A:B5
REQUEST CODE: DS5YA-KNXJH-W82B8-GS38D-6N7P6-9G8YD-CNZRG-8YDL7

Thank you so much

[Quagbih2011]

Hi jotunn ,
can you help me please? departing employee change the ce password
please help me with a reset. Thanks!

sn: AA2M041017024
MAC: 00:20:6B:4A:4B: DF
CE password request： 2GVPZ-6AQQX-KNHM2-8HZP8-6FUTH-9G8YD-ENJQG-8ZDDV

[jotunn]

my c266 dont enter SMode
Please help,thank you!

Reset code for your machine:
MFP Serial Number A90H081012839
Reset Code EY38A-R3XVQ-AUHVH-3GPBF-NLCSN-GG8YD-ENJQG-8YTHT

Payment link:

https://www.paypal.com/ncp/payment/M5LQ2TNC5MWVS

--
Regards

[wgkingwy]

my c266 dont enter SMode
Please help,thank you!

[wgkingwy]

my c266 dont enter SMode
Please help,thank you!

[technics1210]

It's worked out :-)

Thank you very much for that.

Wishing you a nice day

[jotunn]

Hello,

I bought a used C368.

Unfortunately I can't get into the CE menu.
I don't have a password.
I don't currently need access to the menu. But it's always good to have all the passwords for a machine

Would you be so kind as to send me the reset code?

Thx.
Technics

Reset code for your machine:
MFP Serial Number A7PU021020615
Reset Code 9XADN-ZNKWB-3E5HQ-GTXK8-TYD58-6G8YD-ENJQG-EZTDX

--
Regards

[jotunn]

So basically you are saying your help is going mostly towards 3rd and 4th cases. If so I would stop it immediately!
Don't get me wrong I'm all in helping other techs earn their money but they(crooks) kreep too damn easy here.

The third case seems acceptable. The customer is the owner of the machine (we're not talking about machines under contract), and he has the exclusive right to decide who services his machine. So in a perfect world, when the machine is delivered to the customer's premises, the customer should be asked to set his own service and administrative password. And all servicing should take place assisted by the customer's representative (data security, privacy issues, etc.).
But it's not a perfect world, and large service centers set up passwords on customers' machines, also the aftermarket receives machines after service contracts with passwords set up.
So every service, even the smallest, should be able to remove passwords.

The fourth case is unarguable, but people lie and it is often difficult to distinguish between mistakes and deliberate action.
The first attempt to stop the problem has been made, and so far it has been successful.

You also have to consider that not all of the world is “first world” - and in many places people want and like to be cheated, just as much as they like to cheat - just such local folklore.

[technics1210]

Hello,

I bought a used C368.

Unfortunately I can't get into the CE menu.
I don't have a password.
I don't currently need access to the menu. But it's always good to have all the passwords for a machine

Would you be so kind as to send me the reset code?

Thx.
Technics

Serial: A7PV021020615
MAC: 00:20:6B:B3:28:F4
Requesst Code: QZFML-EGV5H-57T9Z-4TX9U-AX8LN-SG8YD-ENJQG-EZDRT

[jotunn]

Went back and verified serial # on back of unit and under the meter count. ITs correct. I will GLADLY paypal you at the link you left the other day on another post. Attached is the reset screen you requested

Yes, the serial number is correct this time - the first time it had doubled "0" and I did not notice it. Sorry, I'm blind

MFP Serial Number A8JE011005583
Reset Code PBDX8-ZKDKA-F5D35-3Z2SH-HQE25-WG8YD-ENJQG-EZTDD

I don't even know if this link will work - I did it quickly to deter pests.
If you really want to try, here's the link for you, that will be enough

https://www.paypal.com/ncp/payment/M5LQ2TNC5MWVS

--
Best regards

[tsbservice]

So basically you are saying your help is going mostly towards 3rd and 4th cases. If so I would stop it immediately!
Don't get me wrong I'm all in helping other techs earn their money but they(crooks) kreep too damn easy here.