C360i Booting up at 50% forever

[ThisPete]

For what it's worth, years ago I had a similar issue with a 224e/308 that wouldn't take all of the firmware 'modules'.. John Eckenhoff (U.K. tech specialist) told me to do one part at a time, time consuming but it worked.

Or maybe just do the one that's failed?

[Max]

In my case I don't have ssd installed

You said you didnt have the ssd , Now you are saying its a new but not original. Original as oem or something you bought somewhereelse? Not from Konica?

[Esron Thomas]

You said you didnt have the ssd , Now you are saying its a new but not original. Original as oem or something you bought somewhereelse? Not from Konica?

I said my machine doesn't have ssd installed, but second part wasn't my query, I have konica minolta bh c360i the one I queried. Max thanks for checking, the second part was from different person

[CP-1015]

Can I have please a newer firmware than F231-GG3- RB, please? Then I'll try it with a new stick. Thanks!

[Ziggy]

Can I have please a newer firmware than F231-GG3- RB, please? Then I'll try it with a new stick. Thanks!

GG2-RF is the newest I see . I can send that if you want it

[CP-1015]

GG2-RF is the newest I see . I can send that if you want it

Of course! Very gladly. Thanks.

[Ziggy]

Of course! Very gladly. Thanks.

Just checked again. They just released another firmware GGA-RE. I can send both of the latest Just need an email. You can pm me or post on here

[Esron Thomas]

Just checked again. They just released another firmware GGA-RE. I can send both of the latest Just need an email. You can pm me or post on here

Hi @ziggy I need the latest Firmware as but I think the firmware is region specific, can I get both if it's okay for me?

[Ziggy]

Hi @ziggy I need the latest Firmware as but I think the firmware is region specific, can I get both if it's okay for me?

PM me your email or post it here

[Esron Thomas]

PM me your email or post it here

Here's my email, thomasesron81@gmail.com

[CP-1015]

You said you didnt have the ssd , Now you are saying its a new but not original. Original as oem or something you bought somewhereelse? Not from Konica?

Isn't a ssd bought from somewhere else possible?

[Max]

Nope, it's only original unfortunately. Konica wouldn't miss an opportunity to screw your.

[CP-1015]

Nope, it's only original unfortunately. Konica wouldn't miss an opportunity to screw your.

Ok, thanks, than I know the mistake.

[Esron Thomas]

If I were to replace both storage board and cpu board, do I need any specific steps or it's just plug and play Markksstronghold any ideas?

[plus-COPY]

If I were to replace both storage board and cpu board, do I need any specific steps or it's just plug and play Markksstronghold any ideas?

Everything is very simple, provided you determine what is damaged. Dismantle the SSD, use a clean 16/32GB SD card and install the firmware, we'll see what the result is. I don't understand why you want to replace both components at the same time, but the procedure is the same.