Activation Code for AirPrint2.1

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • B0265
    Senior Tech

    500+ Posts
    • Jan 2007
    • 718
    #1

    Activation Code for AirPrint2.1

    Does any of you have the AirPrint 2.1 activation code for a Ineo +450i?
    Tags: 450i, activation, airprint, code, ineo
    • emujo2
      Service Manager

      1,000+ Posts
      • Mar 2017
      • 1580
      #2
      Re: Activation Code for AirPrint2.1

      Km has not released this yet..Drop the function version down to 2.0 E

        Comment

        • Synthohol
          Certified Konica Expert

          Site Contributor
          5,000+ Posts
          • Mar 2016
          • 5735
          #3
          Re: Activation Code for AirPrint2.1

          CAUSE: Function version 2.2 added support for Air Print version 2.1. A certificate is required from Apple development to allow the functionality on the device.

          SOLUTION: Change the Function Version to 2.1 using software switch settings.

          [Service Mode] -> [System 2] -> [Software switch Setting]

          Software switch number 25 to 0x20 (HEX 20)


          Air Print is still functional using version 2.1.
          We know a thing or two because we've seen a thing or two.
          The medication helps though...

            Comment

            • Ziggy
              Senior Tech

              Site Contributor
              VIP Subscriber
              500+ Posts
              • Feb 2018
              • 679
              #4
              Re: Activation Code for AirPrint2.1

              Originally posted by Synthohol
              CAUSE: Function version 2.2 added support for Air Print version 2.1. A certificate is required from Apple development to allow the functionality on the device.

              SOLUTION: Change the Function Version to 2.1 using software switch settings.

              [Service Mode] -> [System 2] -> [Software switch Setting]

              Software switch number 25 to 0x20 (HEX 20)


              Air Print is still functional using version 2.1.

              Airprint is now available with firmware G00-M2 and higher current version for the 450i is G00-N4. you can set switch 25 to hex 30 with no problem

                Comment

                • copytechtrouble
                  Technician

                  50+ Posts
                  • Nov 2020
                  • 91
                  #5
                  Re: Activation Code for AirPrint2.1

                  the latest firmware (N4 and M2 i believe) have this issue resolved but if you don't have access to the firmware there is a code on this thread that will enable airprint.

                  Develop 450i Function Code For Airprint 2.1 - Copytechnet.com
                  https://www.copytechnet.com/forums/konica-minolta/163161-develop-450i-function-code-airprint-2-1-a.html?highlight=airprint+forum%3A40

                    Comment

                    • tsbservice
                      Field tech

                      Site Contributor
                      5,000+ Posts
                      • May 2007
                      • 7909
                      #6
                      Re: Activation Code for AirPrint2.1

                      Originally posted by B0265
                      Does any of you have the AirPrint 2.1 activation code for a Ineo +450i?
                      I tried to send you a message but your PM is full. Try this:
                      KVX4RPQ7G7FQQRQPC3F6XRWYM2G3TXVV
                      A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
                      Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                        Comment

                        • B0265
                          Senior Tech

                          500+ Posts
                          • Jan 2007
                          • 718
                          #7
                          Re: Activation Code for AirPrint2.1

                          Originally posted by tsbservice
                          I tried to send you a message but your PM is full. Try this:
                          KVX4RPQ7G7FQQRQPC3F6XRWYM2G3TXVV
                          Thanks for the code. I can't delete any messages in my inbox, it says "You have 65,535 total out of 100 allowed."

                          At the moment we can't to upgrade to M2 or N4 on this MFP.

                            Comment

                            Previous template Next
                            Working...