M6630cidn with color streaks

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rickncs
    Technician
    • Jan 2015
    • 11
    #1

    [CQ] M6630cidn with color streaks

    Hi All, long time tech/first time posting. Got a Kyocera M6630 color mfp with color streaks. Machine has 104k total and 82k color prints. Black drum was replaced in March for drum surface issues and is still good today. Couple weeks ago serviced it for color streaks on the right side. Could see the wear marks on three color drums matching the streaks, transfer unit was worn/dumping toner all over also. Three drums and transfer unit were replaced, all set up fine and worked good for a week but now the same issue has returned. I wouldn't think developer housings would cause this, have reached out to our Kyocera rep. for suggestions. This forum is way better source for good info so thought I'd give this a shot. Picture of sample is attached. TIA for any tips......REgarner color streaks.jpg
    Tags: color, drum, good, replaced, streaks
    • tmaged
      Owner/Service Manager

      Site Contributor
      1,000+ Posts
      • Oct 2008
      • 1863
      #2
      Re: M6630cidn with color streaks

      Measuring the defect and checking it in the service manual against the repetitive defects guide should give you the answer.
      Hope that helps !
      -Tony
      www.dtios.com
      Become a fan on Facebook

        Comment

        • dalewb74
          Service Manager

          Site Contributor
          1,000+ Posts
          • Feb 2018
          • 1125
          #3
          Re: M6630cidn with color streaks

          kyocera toner? kyocera parts?

            Comment

            • rickncs
              Technician
              • Jan 2015
              • 11
              #4
              Re: M6630cidn with color streaks

              Originally posted by tmaged
              Measuring the defect and checking it in the service manual against the repetitive defects guide should give you the answer.
              Doesn't appear to be repetitive, more random. Will be going to site soon to take closer look. Thanks.

                Comment

                • rickncs
                  Technician
                  • Jan 2015
                  • 11
                  #5
                  Re: M6630cidn with color streaks

                  Originally posted by dalewb74
                  kyocera toner? kyocera parts?
                  Absolutely. We're Kyocera dealer, machine on contract with all OEM parts and supplies. Didn't think to mention that in original post. Thanks.

                    Comment

                    • Ropariva
                      Senior Tech

                      500+ Posts
                      • Mar 2016
                      • 639
                      #6

                        Comment

                        • rickncs
                          Technician
                          • Jan 2015
                          • 11
                          #7
                          Re: M6630cidn with color streaks

                          Returned today to check some other items- BTW I'm the only tech in our company in this territory. It's looking like one of 2 things so far. Either the client was referring to an old print from before and assumed it was still happening ( seen this a few times over the last 39 years ) or might have had something to do with a paper clip I found behind the mylar that runs along the bottom of the silver transport roller ( reg. roller? ) , on the same side as the defect, causing some weird electrical noise or interference? All belt samples and test prints looked fine so I'll monitor for a while and see. Thanks for the reply.

                            Comment

                            • Ropariva
                              Senior Tech

                              500+ Posts
                              • Mar 2016
                              • 639
                              #8
                              Re: M6630cidn with color streaks

                              Originally posted by rickncs
                              Returned today to check some other items- BTW I'm the only tech in our company in this territory. It's looking like one of 2 things so far. Either the client was referring to an old print from before and assumed it was still happening ( seen this a few times over the last 39 years ) or might have had something to do with a paper clip I found behind the mylar that runs along the bottom of the silver transport roller ( reg. roller? ) , on the same side as the defect, causing some weird electrical noise or interference? All belt samples and test prints looked fine so I'll monitor for a while and see. Thanks for the reply.

                                Comment

                                • rickncs
                                  Technician
                                  • Jan 2015
                                  • 11
                                  #9
                                  Re: M6630cidn with color streaks

                                  It's always something, that's for sure.

                                    Comment

                                    Previous template Next
                                    Working...