MP C2503 no pick up

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • luca72
    Field Supervisor

    1,000+ Posts
    • Oct 2017
    • 1710
    #16
    Re: MP C2503 no pick up

    Originally posted by GIUBOSS
    Try swapping with the other paper tray: 54. D1492773
    PULLEY: PICKUP: MECHANICAL ROLLER CLUTCH

    He says that have replace the pick up station assy. With another.
    "loneliness is an invention of the white man, when we are alone we talk to everything around us, we are never alone" (Ojibwa)

      Comment

      • GIUBOSS
        Service Manager

        Site Contributor
        1,000+ Posts
        • Jul 2013
        • 1385
        #17
        Re: MP C2503 no pick up

        Originally posted by luca72
        He says that have replace the pick up station assy. With another.

        Forget about it

          Comment

          • copier tech
            Field Supervisor

            5,000+ Posts
            • Jan 2014
            • 8119
            #18
            Re: MP C2503 no pick up

            I went back with a paper feed drive unit I try lift motor then ran 500 duplex prints without a single jam. This was made of of about 10 runs & I opened & closed the tray to try & replicate the issue again hopefully one of those units was the cause.
            Let us eat, drink, and be merry, because tomorrow we may die!

            For all your firmware & service manual needs please visit us at:

            www.copierfirmware.co.uk - www.printerfirmware.co.uk
            ​

              Comment

              • GIUBOSS
                Service Manager

                Site Contributor
                1,000+ Posts
                • Jul 2013
                • 1385
                #19
                Re: MP C2503 no pick up

                Originally posted by copier tech
                I went back with a paper feed drive unit I try lift motor then ran 500 duplex prints without a single jam. This was made of of about 10 runs & I opened & closed the tray to try & replicate the issue again hopefully one of those units was the cause.


                Don't trust this: 24.AW500040
                (x2)
                PUSH SWITCH: SW
                1AG-550: 10MA

                  Comment

                  Previous 1 2 template Next
                  Working...