14 results in 0.0102 seconds.
-
AR-M455N D28 TPFD2ND2 jams
I got a call last week for jamming from the right side of the AR-D28 Tandem tray. They've had the machine for over a year with no problems. They were... -
ARM355N bleeding through 2 sided
This only occurs when using the df doing 2-2 sided, good original. Have done the white reference, with and without paper between the DF glass, also tried... -
Sharp ARM355N
Hi everybody, happy friday!
We just got a Sharp ARM 355N but the key operator code was changed and we have not being able to install the... -
ARM355N F2-00 code (Imagistis im3511)
This customer has two indentical units. I swapped the dev stations.
The code followed the dev station. The unit from the other machine... -
AR-M355N print driver
My customer called today and said that they print some kind of scripts for their pharmacy with a specific program they must use. They are complaining... -
Sharp AR-M355N error code F2-00
What is error code F2-00
I replaced the toner car and cleaned out tray #1. And then the code came up.
when i print from the computer... -
AR-M355N Firware update: NG
When trying to update the firmware on 2 AR-M355N's via network, the error NG (no good) comes up immediately. I seem to recall something regarding this... -
Sharp AR-M355N
Hi, Have one of these ... it has the scan function and a serial #, don't have the software to talk to it .. I've been told that there is another way to... -
AR-M355N feeds then cycles/ eventually misfeeds
I am working on a Sharp AR-M355n that the ADF misffeds. Rebuilt the feed with feed shaft, 1-way feed clutch, reg. mag. clutch, ( Feed shaft mag. clutch... -
Sharp Ar-M355N Deleting Profile
I am having a problem deleting profiles which are no longer used for our AR-M355N device. Does anyone know how this can be done?
Thanks,... -
need help with Arm355n
i have a customers machine that is melting down transperancies or taking up to 30 minutes to do 1 transperancie, any ideas would be greatly apprecia... -
Sharp AR-M355N AINPD_S Jam Codes
Hello Everyone,
I a AR-M355N equiped with an AR-DU4 Duplex module and an AR-FN6 Finisher. Intermittently, the machine will jam with a AINPD_S... -
Anyone have service manual for Sharp ARM355N?
Does anyone know where I can find the service manual for the Sharp ARM355N?
Thanks a bunch! -
AR-M355N reboot, lockup & blue screen?
Hi all, 1st post and it's a doozie! Sorry in advance for the L-O-N-G post!
I have a Sharp AR-M355N that has been giving me problems for over...
