Konica Minolta C558 LCT (PC-415) Paper not feeding straight.
Other trays are fine. Demo page is attached.
Kindly advise....
Search Result
Collapse
13 results in 0.0108 seconds.
Keywords
Members
Tags
-
HP M577 Printer Faded right side of print
Replaced transfer belt unit and roller , clear dark lines on copies .Copies and print jobs has faded or blank on the right, one inch straight down the... -
HP M557 Faded right side of print
Replace transfer belt and roller, clear dark lines on copies. Copies and print job has faded or blank on the right, one inch straight down the whole page.Cleaned... -
hsh6049 started a topic Please could someone advise& explain whts going on with magenta print out issuein XeroxPlease could someone advise& explain whts going on with magenta print out issue
hi
i am really appreciated someone could advise with print test pattern 30 % a lot of straight line is it due on magenta developer tank... -
-
Kyocera 8052 trailing edge skew
I've got two machines similar volume both skew at trail edge A3.
MPT tray appears to be straight.
I thought it was only the...Last edited by fishleg; 03-19-2021, 09:22 PM. -
MP 6055 Fuser compatability
Hi Guys,
Will be receiving some MP 6055 soon
I'm wondering if anyone in North America has tried using the 6054 fusing unit in... -
How are Lexmark CX860s?
Greetings. Ricoh picked up this product as the M C550SRF and I am wondering how this rates as a printer. Is it a piece of junk, good machine or ??. I... -
MPC3002 not connecting to network
My IT guy sez the nic board, which has been incorporated on the control bd, needs to be replaced.
Is there anything special I will need to do after... -
E012-003 Error Code Canon iradv c356i
This code comes straight up at power on no drive or predrive before error code comes straight up.
The manual suggests main drive assy or drive motor... -
Skewed copies on a MX-654N
Hello, I am getting skewed copies from off the glass and from the doc feeder. It happens from all drawers but I dont think it is anything mechanical.... -
CS3010i DATA MIGRATION TO CS3212i
Good afternoon,
have tried to migrate data between machines in the past using the service mode sim but have yet to be successful. Is there a specific... -
MX-FN27
Is anyone else having problems with these POS finishers? The one I have at this time is sending the papers out not straight. When they exit the finisher...