KM Feed rollers

[allan]

Re: KM Feed rollers

For those with limited space - you dont need to carry or use the old a00j red rollers anymore. Many of our techs now fit the pink, clippy rollers with grey cores (a64 part number) to everything.

You can pull out this grey core and use it in place of the a108 rollers too - also without issue.

I have a c360i already with 100k on it so that will be the first i series i'll have to change rollers on at some stage - I already have their rollers and other parts in stock but have not needed them yet. (except for a factory destroyed belt that needed replacement)

Please can you share the full part number for those, out of the loop with the newest stuff out there.

[tsbservice]

Re: KM Feed rollers

Please can you share the full part number for those, out of the loop with the newest stuff out there.

Here you are:
A64J564101

[copier tech]

Re: KM Feed rollers

Here you are:
A64J564101

That's the 8 series roller its more expensive that the original A00J563600

[tsbservice]

Re: KM Feed rollers

Here you are:
A64J564101

That's the 8 series roller its more expensive that the original A00J563600

No, here that is not for 8 series. That is feed roller for BH C250i.
A00J563600 is feed/sep roller for C258.

[copier tech]

Re: KM Feed rollers

No, here that is not for 8 series. That is feed roller for BH C250i.
A00J563600 is feed/sep roller for C258.

In The UK the 8 series come with the clip in rollers A64J564101

[Bix]

Re: KM Feed rollers

Are there any advantages to putting iSeries rollers in the 8 series?
I started with KM which provided three identical rolls for everything, then 2 + 1 and now all different

[srvctec]

Re: KM Feed rollers

That's the 8 series roller its more expensive that the original A00J563600

Agreed

No, here that is not for 8 series. That is feed roller for BH C250i.
A00J563600 is feed/sep roller for C258.

Here in the US, the 8 series (C458) parts manual I just looked in, has the A64J564101 listed as the stock feed roller.

In The UK the 8 series come with the clip in rollers A64J564101

Same here in the US.

[tsbservice]

Re: KM Feed rollers

Here in the US, the 8 series (C458) parts manual I just looked in, has the A64J564101 listed as the stock feed roller.
Same here in the US.

Check C258 parts manual, you may be surprised

[srvctec]

Re: KM Feed rollers

Check C258 parts manual, you may be surprised

That's what I figured, the smaller machines held onto the older rollers.

[Dev_nos]

Re: KM Feed rollers

I use mostly China rollers. Like other poster I put them on oem shafts. If you get them from the right source they are same quality as oem. Wouldn't be surprised if they are coming from same factory.

I do use only OEM for black ribbed roller.

Where the real saving is using the aftermarket rollers on ADF's , no way in hell I'm paying $30 for a paper feed roller, A143563100, etc !!!!!

Can you give the name of your China Supplier please?
Thank you!

[Synthohol]

Re: KM Feed rollers

A00j563600 rollers are like 8 bucks if you are a legit dealer or can buy from one

[femaster]

Re: KM Feed rollers

I use mostly China rollers. Like other poster I put them on oem shafts. If you get them from the right source they are same quality as oem. Wouldn't be surprised if they are coming from same factory.

I know this is quite the antique thread here, but I'm in the market for a new source of after market tires. We had a source from China, through AliExpress, but after many years of purchasing from them, it would appear that our source has dried up. The tires were just under 1/2 the price from the OEM KM tires and no matter how closely they were examined, I could not tell the difference between the OEM and the tires they were selling us. Even the bags they came in were identical.

I was wondering if you were still getting your tires from the same source, and if you would be willing to divulge where you are getting from? I'm about to embark on a not so fun journey of requesting samples for a bunch of different sellers on AliExpress once again, but was hoping that maybe you had some information to save me a little time on that journey.

Thanks in advance for any leads.

[Synthohol]

IF THEY ARE THIS COLOR, THEY ARE GARBAGE.
image.png
the OEM 8.00 rollers below will always be the best.

this color GOOD!!
image.png