KM Feed rollers

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • allan
    RTFM!!

    5,000+ Posts
    • Apr 2010
    • 5462

    #16
    Re: KM Feed rollers

    Originally posted by EarthKmTech
    For those with limited space - you dont need to carry or use the old a00j red rollers anymore. Many of our techs now fit the pink, clippy rollers with grey cores (a64 part number) to everything.

    You can pull out this grey core and use it in place of the a108 rollers too - also without issue.

    I have a c360i already with 100k on it so that will be the first i series i'll have to change rollers on at some stage - I already have their rollers and other parts in stock but have not needed them yet. (except for a factory destroyed belt that needed replacement)
    Please can you share the full part number for those, out of the loop with the newest stuff out there.
    Whatever

    Comment

    • tsbservice
      Field tech

      Site Contributor
      5,000+ Posts
      • May 2007
      • 7963

      #17
      Re: KM Feed rollers

      Originally posted by allan
      Please can you share the full part number for those, out of the loop with the newest stuff out there.
      Here you are:
      A64J564101
      A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
      Blessed are they who can laugh at themselves, for they shall never cease to be amused.

      Comment

      • copier tech
        Field Supervisor

        5,000+ Posts
        • Jan 2014
        • 8131

        #18
        Re: KM Feed rollers

        Originally posted by tsbservice
        Here you are:
        A64J564101

        That's the 8 series roller its more expensive that the original A00J563600




        Let us eat, drink, and be merry, because tomorrow we may die!

        For all your firmware & service manual needs please visit us at:

        www.copierfirmware.co.uk - www.printerfirmware.co.uk

        Comment

        • tsbservice
          Field tech

          Site Contributor
          5,000+ Posts
          • May 2007
          • 7963

          #19
          Re: KM Feed rollers

          Originally posted by tsbservice
          Here you are:
          A64J564101
          Originally posted by copier tech
          That's the 8 series roller its more expensive that the original A00J563600
          No, here that is not for 8 series. That is feed roller for BH C250i.
          A00J563600 is feed/sep roller for C258.
          A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
          Blessed are they who can laugh at themselves, for they shall never cease to be amused.

          Comment

          • copier tech
            Field Supervisor

            5,000+ Posts
            • Jan 2014
            • 8131

            #20
            Re: KM Feed rollers

            Originally posted by tsbservice
            No, here that is not for 8 series. That is feed roller for BH C250i.
            A00J563600 is feed/sep roller for C258.
            In The UK the 8 series come with the clip in rollers A64J564101
            Let us eat, drink, and be merry, because tomorrow we may die!

            For all your firmware & service manual needs please visit us at:

            www.copierfirmware.co.uk - www.printerfirmware.co.uk

            Comment

            • Bix
              Service Manager

              1,000+ Posts
              • Apr 2018
              • 1421

              #21
              Re: KM Feed rollers

              Are there any advantages to putting iSeries rollers in the 8 series?
              I started with KM which provided three identical rolls for everything, then 2 + 1 and now all different

              Comment

              • srvctec
                Former KM Senior Tech

                500+ Posts
                • Oct 2009
                • 827

                #22
                Re: KM Feed rollers

                Originally posted by copier tech
                That's the 8 series roller its more expensive that the original A00J563600




                Agreed

                Originally posted by tsbservice
                No, here that is not for 8 series. That is feed roller for BH C250i.
                A00J563600 is feed/sep roller for C258.
                Here in the US, the 8 series (C458) parts manual I just looked in, has the A64J564101 listed as the stock feed roller.

                Originally posted by copier tech
                In The UK the 8 series come with the clip in rollers A64J564101
                Same here in the US.
                Started in the copier service business in the fall of 1988 and worked at the same company for 33.5 years, becoming the senior tech in 2004 but left to pursue another career on 4/29/22.

                Comment

                • tsbservice
                  Field tech

                  Site Contributor
                  5,000+ Posts
                  • May 2007
                  • 7963

                  #23
                  Re: KM Feed rollers

                  Originally posted by srvctec


                  Here in the US, the 8 series (C458) parts manual I just looked in, has the A64J564101 listed as the stock feed roller.
                  Same here in the US.
                  Check C258 parts manual, you may be surprised
                  A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
                  Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                  Comment

                  • srvctec
                    Former KM Senior Tech

                    500+ Posts
                    • Oct 2009
                    • 827

                    #24
                    Re: KM Feed rollers

                    Originally posted by tsbservice
                    Check C258 parts manual, you may be surprised
                    That's what I figured, the smaller machines held onto the older rollers.
                    Started in the copier service business in the fall of 1988 and worked at the same company for 33.5 years, becoming the senior tech in 2004 but left to pursue another career on 4/29/22.

                    Comment

                    • Dev_nos
                      Junior Member
                      • Jun 2011
                      • 5

                      #25
                      Re: KM Feed rollers

                      Originally posted by copyman
                      I use mostly China rollers. Like other poster I put them on oem shafts. If you get them from the right source they are same quality as oem. Wouldn't be surprised if they are coming from same factory.

                      I do use only OEM for black ribbed roller.

                      Where the real saving is using the aftermarket rollers on ADF's , no way in hell I'm paying $30 for a paper feed roller, A143563100, etc !!!!!
                      Can you give the name of your China Supplier please?
                      Thank you!

                      Comment

                      • Synthohol
                        Certified Konica Expert

                        Site Contributor
                        5,000+ Posts
                        • Mar 2016
                        • 5794

                        #26
                        Re: KM Feed rollers

                        A00j563600 rollers are like 8 bucks if you are a legit dealer or can buy from one
                        We know a thing or two because we've seen a thing or two.
                        The medication helps though...

                        Comment

                        • femaster
                          Service Manager

                          1,000+ Posts
                          • May 2011
                          • 1478

                          #27
                          Originally posted by copyman
                          Re: KM Feed rollers

                          I use mostly China rollers. Like other poster I put them on oem shafts. If you get them from the right source they are same quality as oem. Wouldn't be surprised if they are coming from same factory.
                          I know this is quite the antique thread here, but I'm in the market for a new source of after market tires. We had a source from China, through AliExpress, but after many years of purchasing from them, it would appear that our source has dried up. The tires were just under 1/2 the price from the OEM KM tires and no matter how closely they were examined, I could not tell the difference between the OEM and the tires they were selling us. Even the bags they came in were identical.

                          I was wondering if you were still getting your tires from the same source, and if you would be willing to divulge where you are getting from? I'm about to embark on a not so fun journey of requesting samples for a bunch of different sellers on AliExpress once again, but was hoping that maybe you had some information to save me a little time on that journey.

                          Thanks in advance for any leads.
                          Last edited by femaster; 4 days ago.
                          A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
                          My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

                          Comment

                          • Synthohol
                            Certified Konica Expert

                            Site Contributor
                            5,000+ Posts
                            • Mar 2016
                            • 5794

                            #28
                            IF THEY ARE THIS COLOR, THEY ARE GARBAGE.
                            image.png
                            the OEM 8.00 rollers below will always be the best.

                            this color GOOD!!
                            image.png
                            We know a thing or two because we've seen a thing or two.
                            The medication helps though...

                            Comment

                            Working...