Taskalfa 3051ci Firmware -any need for an update?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dolomike
    Junior Member
    • May 2025
    • 7
    #1

    Taskalfa 3051ci Firmware -any need for an update?

    Hi all,

    The Taskalfa 3051ci I have has the following firmware installed:
    Software Version
    System : 2N4_2000.004.202
    Engine : 2N4_1000.003.003
    Panel : 2N4_7000.004.202
    Scanner : 2N4_1200.003.001
    I don't think this unit has had any servicing since it was installed, so I'm curious if there are any critical/important firmware releases that should be applied to this machine. I'm happy to keep it as is as everything seems fine, but you never know!

    Thanks!


    Tags: None
    • tmaged
      Owner/Service Manager

      Site Contributor
      1,000+ Posts
      • Oct 2008
      • 1863
      #2
      At this point probably not. It's getting hard to get parts for these units.
      Hope that helps !
      -Tony
      www.dtios.com
      Become a fan on Facebook

        Comment

        • Ropariva
          Senior Tech

          500+ Posts
          • Mar 2016
          • 638
          #3
          I had 500 of these machines in the field ten years ago. Exactly none now. Three generations have happened since and they are well obsolete. Don’t upgrade the firmware, upgrade the machine.

            Comment

            • copier tech
              Field Supervisor

              5,000+ Posts
              • Jan 2014
              • 8111
              #4
              Originally posted by dolomike
              Hi all,

              The Taskalfa 3051ci I have has the following firmware installed:
              Software Version
              System : 2N4_2000.004.202
              Engine : 2N4_1000.003.003
              Panel : 2N4_7000.004.202
              Scanner : 2N4_1200.003.001
              I don't think this unit has had any servicing since it was installed, so I'm curious if there are any critical/important firmware releases that should be applied to this machine. I'm happy to keep it as is as everything seems fine, but you never know!

              Thanks!

              This is a latest available firmware for your 3051ci. It addresses various bug fixes.

              README.pdf

              Let us eat, drink, and be merry, because tomorrow we may die!

              For all your firmware & service manual needs please visit us at:

              www.copierfirmware.co.uk - www.printerfirmware.co.uk
              ​

                Comment

                • ThisPete
                  Too old to care

                  Site Contributor
                  100+ Posts
                  • Jun 2014
                  • 150
                  #5
                  If it has no problems, leave it as is.. don't wake the bear, it might get angry...
                    👍 2

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22963
                      #6
                      Originally posted by ThisPete
                      If it has no problems, leave it as is.. don't wake the bear, it might get angry...
                      Do you have an issue that needs fixing? If no, then don't awaken the bear.
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=
                        👍 1

                        Comment

                        Previous template Next
                        Working...