M6026cidn color reg

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Geo
    Senior Tech

    500+ Posts
    • Nov 2010
    • 662
    #1

    [CQ] M6026cidn color reg

    Hi Kids

    So I have a M6026cidn that is giving me major fits.. The box isn't holding registration . I followed the TB for color registration fix but the it doesn't hold, color registrations starts going out after a couple dozen prints. I don't know if this is helpful but its the m and y colors that are going severely out of wack , c for the most part is holding .The reg is so bad that if you tried to realign the registration without the firmware reset , it will take at least 30 tries..
    I did replace the transfer belt and checked the two belt sensors..


    Any thoughts ?

    Thanks much for the help...

    Geo
    Tags: belt, color, m6026cidn, reg, registration
    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 8121
      #2
      Re: M6026cidn color reg

      Originally posted by Geo
      Hi Kids

      So I have a M6026cidn that is giving me major fits.. The box isn't holding registration . I followed the TB for color registration fix but the it doesn't hold, color registrations starts going out after a couple dozen prints. I don't know if this is helpful but its the m and y colors that are going severely out of wack , c for the most part is holding .The reg is so bad that if you tried to realign the registration without the firmware reset , it will take at least 30 tries..
      I did replace the transfer belt and checked the two belt sensors..


      Any thoughts ?

      Thanks much for the help...

      Geo
      Did you update the firmware & clean the patch sensors ?
      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk
      ​

        Comment

        • KYO_OEM
          Senior Tech

          500+ Posts
          • Aug 2011
          • 704
          #3
          Re: M6026cidn color reg

          did you follow bulletin F096?
          Special reset FW needed
          Attached Files

            Comment

            • Geo
              Senior Tech

              500+ Posts
              • Nov 2010
              • 662
              #4
              Re: M6026cidn color reg

              Originally posted by KYO_OEM
              did you follow bulletin F096?
              Special reset FW needed
              Yep several times , two thumb drives with separate firmware..Funny thing , no problem for a several years and then red started failing...

                Comment

                • Geo
                  Senior Tech

                  500+ Posts
                  • Nov 2010
                  • 662
                  #5
                  Re: M6026cidn color reg

                  Originally posted by copier tech
                  Did you update the firmware & clean the patch sensors ?
                  Yes I did and confirmed that the cleaning pad was retracting...

                  Thanks

                    Comment

                    • tmaged
                      Owner/Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Oct 2008
                      • 1863
                      #6
                      Re: M6026cidn color reg

                      Generally it's the primary belt, but if a drum or DV unit isn't laying down the correct density, that will throw the registration off also.
                      I do the internal test page to check the density of each color. You could also use Blackcat's test pages that he posted from a flash drive.
                      Hope that helps !
                      -Tony
                      www.dtios.com
                      Become a fan on Facebook

                        Comment

                        • blackcat4866
                          Master Of The Obvious

                          Site Contributor
                          10,000+ Posts
                          • Jul 2007
                          • 22973
                          #7
                          Re: M6026cidn color reg

                          Like this:
                          Attached Files
                          If you'd like a serious answer to your request:
                          1) demonstrate that you've read the manual
                          2) demonstrate that you made some attempt to fix it.
                          3) if you're going to ask about jams include the jam code.
                          4) if you're going to ask about an error code include the error code.
                          5) You are the person onsite. Only you can make observations.

                          blackcat: Master Of The Obvious =^..^=

                            Comment

                            • tee
                              Technician

                              50+ Posts
                              • Aug 2014
                              • 79
                              #8
                              Re: M6026cidn color reg

                              I had same problem and it was firmware , brand new transfer belt ,cleaned sensors, and
                              performed coarse adjustment then the fine color calibration after the engine reset.

                                Comment

                                • Geo
                                  Senior Tech

                                  500+ Posts
                                  • Nov 2010
                                  • 662
                                  #9
                                  Re: M6026cidn color reg

                                  Originally posted by blackcat4866
                                  Like this:
                                  Cat

                                  Thanks much....

                                    Comment

                                    Previous template Next
                                    Working...