ECOSYS P5026cdw - disable printing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kuby
    Senior Tech

    1,000+ Posts
    • Oct 2007
    • 1388

    #1

    ECOSYS P5026cdw - disable printing

    I know that it may not be possible but we had a P5026cdw that was snatched at a show. It is on KFS and I can see it has run out of a color toner. Is there a way to disable the printer?
  • Ropariva
    Senior Tech

    500+ Posts
    • Mar 2016
    • 639

    #2

    Comment

    • kuby
      Senior Tech

      1,000+ Posts
      • Oct 2007
      • 1388

      #3
      Re: ECOSYS P5026cdw - disable printing

      *************************************
      You can't edit the screen on a P5026cdw.

      Comment

      • dalewb74
        Service Manager

        Site Contributor
        1,000+ Posts
        • Feb 2018
        • 1125

        #4
        Re: ECOSYS P5026cdw - disable printing

        remove the power cord? disconnect the network connection? setup a private network?

        Comment

        • Larhal
          Semi Retired

          Site Contributor
          VIP Subscriber
          500+ Posts
          • May 2013
          • 541

          #5
          Re: ECOSYS P5026cdw - disable printing

          Originally posted by dalewb74
          remove the power cord? disconnect the network connection? setup a private network?

          If you had read the first post he stated that the printer was taken, snatched, at a show. So if he was able to remove the power cord would you not just take, Snatch, it back?
          Larhal

          Retired Part Time

          If all else fails read the Service Manual!

          If that fails, meet me at the pub and we will discuss it.

          Comment

          • tmaged
            Owner/Service Manager

            Site Contributor
            1,000+ Posts
            • Oct 2008
            • 1863

            #6
            Re: ECOSYS P5026cdw - disable printing

            I checked one on KFS, there's not much you can do short of changing the IP address. I was going to suggest changing it from port 9100, but that option isn't in there.
            Hope that helps !
            -Tony
            www.dtios.com
            Become a fan on Facebook

            Comment

            • ihatefinishers13
              Senior MFP Technician

              500+ Posts
              • Feb 2020
              • 652

              #7
              Re: ECOSYS P5026cdw - disable printing

              You could send setting changes through KFS, disable USB, and change the IP address to be something weird, HOWEVER, then YOU can't get in to it on KFS either, and it will be gone forever.

              Comment

              Working...