MP C5501 I regularly get colored cubes

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • anothertech
    Service Manager

    Site Contributor
    1,000+ Posts
    • Nov 2007
    • 1762
    #16
    Re: MP C5501 I regularly get colored cubes

    Don't drive yourself crazy with this, just go ahead and replace the ITB cleaning unit and all will be well.

      Comment

      • copier tech
        Field Supervisor

        5,000+ Posts
        • Jan 2014
        • 8131
        #17
        Re: MP C5501 I regularly get colored cubes

        I agree, take a spare ITB & cleaning unit from a spare machine if you can
        Let us eat, drink, and be merry, because tomorrow we may die!

        For all your firmware & service manual needs please visit us at:

        www.copierfirmware.co.uk - www.printerfirmware.co.uk
        ​

          Comment

          • tnelson
            Technician
            • Aug 2016
            • 21
            #18
            Re: MP C5501 I regularly get colored cubes

            when you take the itb out flip it over and have a good look along the edge. we have had alot of them tear along the rear edge, then when it goes by it creates a bump mark. just food for thought.

              Comment

              • info@digitaalprint.be
                Technician
                • Aug 2016
                • 33
                #19
                Re: MP C5501 I regularly get colored cubes

                Originally posted by tnelson
                when you take the itb out flip it over and have a good look along the edge. we have had alot of them tear along the rear edge, then when it goes by it creates a bump mark. just food for thought.
                Thanks everyone. I installed a new cleaning unit on the belt and everything was ok.
                I had the old blown out with an air compressor, but this is not sufficient.
                Patrick

                  Comment

                  • blackcat4866
                    Master Of The Obvious

                    Site Contributor
                    10,000+ Posts
                    • Jul 2007
                    • 22999
                    #20
                    Re: MP C5501 I regularly get colored cubes

                    Originally posted by info@digitaalprint.be
                    Thanks everyone. I installed a new cleaning unit on the belt and everything was ok.
                    I had the old blown out with an air compressor, but this is not sufficient.
                    Patrick
                    Congratulations. I didn't really think that compressed air would do anything to improve a warped or worn cleaning blade. =^..^=
                    If you'd like a serious answer to your request:
                    1) demonstrate that you've read the manual
                    2) demonstrate that you made some attempt to fix it.
                    3) if you're going to ask about jams include the jam code.
                    4) if you're going to ask about an error code include the error code.
                    5) You are the person onsite. Only you can make observations.

                    blackcat: Master Of The Obvious =^..^=

                      Comment

                      • info@digitaalprint.be
                        Technician
                        • Aug 2016
                        • 33
                        #21
                        Re: MP C5501 I regularly get colored cubes

                        Originally posted by blackcat4866
                        Congratulations. I didn't really think that compressed air would do anything to improve a warped or worn cleaning blade. =^..^=
                        It was not really a problem that indicate the cleaning blade. When each printed four colors separately diced you think of something else

                          Comment

                          • slimslob
                            Retired

                            Site Contributor
                            25,000+ Posts
                            • May 2013
                            • 37375
                            #22
                            Re: MP C5501 I regularly get colored cubes

                            Originally posted by info@digitaalprint.be
                            It was not really a problem that indicate the cleaning blade. When each printed four colors separately diced you think of something else
                            When you understand the way that the process control system works, you immediately recognize the ID patches when you see them.

                              Comment

                              Previous 1 2 template Next
                              Working...