[Jamming] Nashuatec Dsm735/745

[CrapAimer]

Machine jamming at bridge unit, when checking jam list, showing fuser exit sensor. only done 190k

[TonerMunkeh]

Try a new pressure roller, with a machine that old the roller is probably soft and that causes fuser / duplex exit issues.

[spaceman99]

replace reg guide bar and all clucthes and your fault will be no more. Paper gets stuck by static on gude bar causing jam. Had this error and fault many times

good luck

( there was a thread on this last week with the part numbers on it )

[spaceman99]

here you go try this link

http://www.copytechnet.com/forums/ri...exit-jams.html