Hi,
I'm starting a new topic because it was suggested to me, so here we go.
From previous thread " The Konica Minolta...
20 results in 0.0161 seconds.
-
Bizhub c4050i color
-
tasc alpha 4501i all paper drawers are working
the client says the machine is not working, i go and see that "all" the paper drawers are not functioning, not even the LCT okay i find paper... -
C353 problem. "fails to complete job". Pls help
My c353 problem. All functioning well. When i scan to computer, let's say a book have 200 pages. When scan at half way. The error come out "fails... -
di650 lc drawer not functioning
i have a di650 and the third drawer is not even pulling the paper out from the drawer, ive changed the paper feed mechanism with drawer number1 and number... -
fax system M
we have a fax system M at a location that functions fine 1/2 of the day and then stops receiving till the power off the cs 5050 and then it starts functioning... -
Toshiba eStudio 282 Hang up after 1 copy
Hi Sir's, I got a problem with my toshiba estudio282.
After 1 copy the display still says COPYING and the keys are not functioning, in other word... -
Ricoh Aficio 3045 fax board not functioning
When press fax button, no fax tone and cannot send and receive fax. Telephone line is ok. Already tried to clear memory but still the same. Anyone can... -
sharp arm207 paper jam
there is no paper in this machine, all the sensors seem to be functioning through manually and elecrtonicly testing, yet the machine insists there is... -
e000002-0010 in Ir 6570
Sir,
I m getting e000002-0010 in Ir 6570.Touch screen is also not functioning at this time.
Can u help me out to clear this... -
An ounce of prevention...
This subject is near and dear to my heart......
I don't know how many times I have preached this among my co-workers,, after a copier -
iR105+ display not on
Hi guys, have this problem with one iR105+, when the power switch is turn on, there is no power on the panel, only the pilot light( the small light )... -
C5500 Fiery Faulting// Help
Help... I have a C5500pro with the Fiery x3eTY2
Server type
N103rccs(65C-KM)
Until this morning all has been fine... I... -
e-STUDIO 230 ADF OPEN ERROR
I checked the rear adf open PC sensor & it is functioning properly. Is there secondary sensor that could cause the message to display or is this... -
Canon c1 ff error code
C1 functioning perfectly then an FF error code-how to clear? -
mx3100 hdd
Anyone out there tried fitting a 2 1/2 inch sata drive in place of the standard 80 gb 3 1/2?
Just wondered if any of us were stuck needing...
