14 results in 0.0200 seconds.
-
Canon C7010 - Weak Black
Hi, folks - I've got a C7010VP that has weak black in the prints. I had swapped the entire PCB (1-1,1-2, and 1-3) rack to resolve a different issue, and... -
Bizhub 600 jam at exit gate
I have a Biz hub 600 that is jam at the trunover gate at the exit unit, the gate soleniod is acting like it is weak. machine has 261K on it has anyone... -
designjet 500 bumps the platen while printing and makes noise
The carriage head doesnt move smoothly accross the platen, the image isnt affected but
it bumps across the platen and makes noise what can be done... -
Bizhub C250 Bypass Won't Pull
Okay, all gears turning ok. Clutch activates to turn feed tire, but it is very weak. I put another clutch in, same result. If I put any pressure on... -
250ci background, *another one
full page, 2mm interval, very even.
Not drum, not charge, DLP? primary transfer roller?
the troubleshooting guide suggested...Last edited by jmaister; 03-22-2011, 10:54 PM. -
bizhub c35
I'm considering beginning to sell the bizhub model C35 as an MFP solution to various clients. Wanted some feedback as to the strengths and weaknesses... -
KM-1128 dark copies overnight and in the morning
We have an 1128 that gives dark, not black but dark, prints overnight on faxes and in the morning with everything for a little while then goes away for... -
Bizhub C451 Weak image when Copying from scanner only
Bizhub C451 when copying from scanner weak copies. Firmware at R6, when doing gradation figures are in the 200's. any thoughts ? -
KIP Techs
Are there any "seasoned" KIP techs out there? KIP America resources pretty limited to new products. Need support for an old K-27 scanner unit.... -
bz 500
Hi Friends,
Please share your ideas about this matter.
Problem : very weak image transfer on the paper.
Good image... -
Kyocera C3225 random colored lines
Hi guys this one is seriously stumping me.
C3225 that works just fine 99% of the time. And by 99% I mean literally out of 100 copies in the shop... -
Weak ( light ) in the top area of the image in 1060
In my 1060 I suffer form having light or weak in the top area , and good quality in the bottom area of the image . when copying on Glass or ADF -
Canon C1 Imagepress weak spot
After a lot of work arounds and great help from here
The overall big problem with the C1 IS................
.................................................. ................... -
toshiba dp 187 df
can any one tell me whats wrong
toshiba dp 187 df.
makes real light copies new toner and new drum
same problem light copies
