BH 283 paper feed roller bushings needed

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zodiaco
    Technician
    • Feb 2021
    • 27
    #1

    [Misc] BH 283 paper feed roller bushings needed

    Dear all,

    I need two of the bushings used for the first paper feeder on the 283, number 2 in the attached image. The manufacturer code is 4131 3003 01 however I cannot find anyone to carry these bushings under this code. I appreciate any help. Thank you! darius
    Attached Files
    Tags: 283, bizhub 283, bushings, code, paper
    • Synthohol
      Certified Konica Expert

      Site Contributor
      5,000+ Posts
      • Mar 2016
      • 5735
      #2
      Re: BH 283 paper feed roller bushings needed

      Konica Minolta bizhub 283 Bearings / Bushings
      We know a thing or two because we've seen a thing or two.
      The medication helps though...

        Comment

        • femaster
          Service Manager

          1,000+ Posts
          • May 2011
          • 1458
          #3
          Re: BH 283 paper feed roller bushings needed

          Originally posted by Synthohol
          Konica Minolta bizhub 283 Bearings / Bushings
          Those are for the registration rollers, pretty sure they are too big to fit the feed unit. The ones he is referring to are the plastic ones on the tire shafts in the feed unit itself.

          Originally posted by zodiaco
          Dear all,

          I need two of the bushings used for the first paper feeder on the 283, number 2 in the attached image. The manufacturer code is 4131 3003 01 however I cannot find anyone to carry these bushings under this code. I appreciate any help. Thank you! darius
          Do you have any parts machines or accessories at all? Those bushings were used in so many different models over the years, you should be able to salvage them from something you have laying around.

          According to the parts "bible", that bushing can be found in the following machines and accessories:
          bizhub 223 bizhub 224e bizhub 283 bizhub 284e bizhub 308 bizhub 308e bizhub 363 bizhub 364e
          bizhub 368 bizhub 368e bizhub 423 bizhub 454e bizhub 458 bizhub 458e bizhub 501 bizhub 552
          bizhub 554e bizhub 558 bizhub 558e bizhub 654 bizhub 654e bizhub 658e bizhub 754 bizhub 754e
          bizhub 758 bizhub 808 bizhub 850i bizhub 950i bizhub 958 bizhub C224e bizhub C258 bizhub C281
          bizhub C284e bizhub C308 bizhub C3300i bizhub C3320i bizhub C3350i bizhub C3351 bizhub C353P
          bizhub C35P bizhub C364 bizhub C364e bizhub C368 bizhub C3851 bizhub C3851FS bizhub C4000i
          bizhub C4050i bizhub C454e bizhub C458 bizhub C552DS bizhub C554e bizhub C558 bizhub C654e
          bizhub C658 bizhub C659 bizhub C754e bizhub C759 Duplex Option FS-508/FS-510 FS-519 FS-522
          Lower Feeder Unit magicolor 3730DN magicolor 4690MF magicolor 4695MF magicolor 4750DN
          magicolor 4750EN magicolor 5670EN magicolor 5670EN(M) magicolor 8650 PC-104 PC-105 PC-106
          PC-109 PC-110 PC-113 PC-114 PC-115 PC-116 PC-118 PC-204 PC-205 PC-206 PC-208 PC-210
          PC-211 PC-213 PC-214 PC-215 PC-216 PC-218 PC-405 PC-406 PC-407 PC-409 PC-410 PC-413
          PC-414 PC-415 PC-416 PC-418 PF-P07 PF-P08 PF-P09 PF-P13 PF-P14 SD-505 SD-507

          Also, since the parts book only goes back so far, there are plenty of older models that have those as well.
          A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
          My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

            Comment

            • tsbservice
              Field tech

              Site Contributor
              5,000+ Posts
              • May 2007
              • 7909
              #4
              Re: BH 283 paper feed roller bushings needed

              Originally posted by femaster
              Those are for the registration rollers, pretty sure they are too big to fit the feed unit. The ones he is referring to are the plastic ones on the tire shafts in the feed unit itself.



              Do you have any parts machines or accessories at all? Those bushings were used in so many different models over the years, you should be able to salvage them from something you have laying around.

              According to the parts "bible", that bushing can be found in the following machines and accessories:
              bizhub 223 bizhub 224e bizhub 283 bizhub 284e bizhub 308 bizhub 308e bizhub 363 bizhub 364e
              bizhub 368 bizhub 368e bizhub 423 bizhub 454e bizhub 458 bizhub 458e bizhub 501 bizhub 552
              bizhub 554e bizhub 558 bizhub 558e bizhub 654 bizhub 654e bizhub 658e bizhub 754 bizhub 754e
              bizhub 758 bizhub 808 bizhub 850i bizhub 950i bizhub 958 bizhub C224e bizhub C258 bizhub C281
              bizhub C284e bizhub C308 bizhub C3300i bizhub C3320i bizhub C3350i bizhub C3351 bizhub C353P
              bizhub C35P bizhub C364 bizhub C364e bizhub C368 bizhub C3851 bizhub C3851FS bizhub C4000i
              bizhub C4050i bizhub C454e bizhub C458 bizhub C552DS bizhub C554e bizhub C558 bizhub C654e
              bizhub C658 bizhub C659 bizhub C754e bizhub C759 Duplex Option FS-508/FS-510 FS-519 FS-522
              Lower Feeder Unit magicolor 3730DN magicolor 4690MF magicolor 4695MF magicolor 4750DN
              magicolor 4750EN magicolor 5670EN magicolor 5670EN(M) magicolor 8650 PC-104 PC-105 PC-106
              PC-109 PC-110 PC-113 PC-114 PC-115 PC-116 PC-118 PC-204 PC-205 PC-206 PC-208 PC-210
              PC-211 PC-213 PC-214 PC-215 PC-216 PC-218 PC-405 PC-406 PC-407 PC-409 PC-410 PC-413
              PC-414 PC-415 PC-416 PC-418 PF-P07 PF-P08 PF-P09 PF-P13 PF-P14 SD-505 SD-507

              Also, since the parts book only goes back so far, there are plenty of older models that have those as well.
              Bingo. Job well done I can't do much 👏
              A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
              Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                Comment

                • copyman
                  Owner / Technician

                  Site Contributor
                  2,500+ Posts
                  • Sep 2005
                  • 4519
                  #5
                  Re: BH 283 paper feed roller bushings needed

                  You have a lot of options with the many machines they were used in but if you can't find them I have them. PM me if you need them.

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22927
                      #6
                      Re: BH 283 paper feed roller bushings needed

                      Measure & photo please.

                      inside diameter (ID):
                      outside diameter (OD)
                      any flats or aligning features?

                      I have a 5gal bucket of various oil impregnated bronze bushings that I can sort through. (It's heavy) =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • Ziggy
                          Senior Tech

                          Site Contributor
                          VIP Subscriber
                          500+ Posts
                          • Feb 2018
                          • 679
                          #7
                          Re: BH 283 paper feed roller bushings needed

                          Originally posted by zodiaco
                          Dear all,

                          I need two of the bushings used for the first paper feeder on the 283, number 2 in the attached image. The manufacturer code is 4131 3003 01 however I cannot find anyone to carry these bushings under this code. I appreciate any help. Thank you! darius

                          Found them on this google search just leave out the spaces search as 4131300301 no spaces or dashes

                            Comment

                            • zodiaco
                              Technician
                              • Feb 2021
                              • 27
                              #8
                              Re: BH 283 paper feed roller bushings needed

                              Except all the companies are either in the Ukraine or in Russia - not a single hit in the USA.
                              Thank you!

                              Originally posted by Markks
                              Found them on this google search just leave out the spaces search as 4131300301 no spaces or dashes

                                Comment

                                • rrrohan
                                  Service Manager

                                  Site Contributor
                                  1,000+ Posts
                                  • Sep 2011
                                  • 1977
                                  #9
                                  Re: BH 283 paper feed roller bushings needed

                                  im sure if you go to your local copier repair place (that service Konica) would prob give them to you for free/cheap from old stock

                                    Comment

                                    Previous template Next
                                    Working...