11 results in 0.0327 seconds.
-
pbrooks259 started a topic T930 during paper calibration get: “diagnostic result: fail” after encoder cal.in HPT930 during paper calibration get: “diagnostic result: fail” after encoder cal.
On a T930 during paper calibration, I am getting: “diagnostic result: fail” right after the attempt to calibrate the analog encoder before...Last edited by pbrooks259; 04-03-2023, 12:18 PM. -
Brother MFC-J6920DW - white stripes
Hello, please do you have an idea, what to check?
See photo.
I clean two strips (encoder strips) where print head runs and it... -
Error E012 -304 Canon iRC 5235i
Please
i have problem in code E012-304 ...i change C drum and i cleaned the drum encoder sensor Wheel put not solved
please advise... -
OJ Pro 8740 encoder
I have the encoder strip and the leaf spring for the right hand side. What goes on the left hand side to secure the encoder. I cant find a spring or fastener... -
Close printhead cover on DJ 500 (SOLVED)
So I walk up to a working 24" Designjet 500 to replace the trailing cables (the old ones were sagging and causing occasional carriage jams) and the... -
Designjet 800, what are the odds?
So, customer number 1 calls with an issue on his 800. I arrive and the machine displays a 21:10 error, for service station. I clean the encoder, lube... -
iPG-825, 03030031-2F2A
For the last couple weeks this machine has been ejecting the paper rolls accompanied by 03010000-2E3E, 03010000-2E3D errors, and "!Roll 1 (upper)... -
HP DesignJet Z3200ps 87.10 error
Hello all,
I just had this Z3200 brought in the shop for an 87.10 error. The tech replaced the belt in the field, but I have been trying... -
HP DesignJet 500 42inch
Hello.I have problem with paper advance (print sample from internet ).Replaced carriage belt,Encoder Strip and paper axis motor with encoder but problem... -
encoder strip Epson WF-5620
Hi. I am trying to locate the encoder strip for the Epson Workforce Pro WF 5620. It does not seem to be near the geared belt as in other models? A diagram... -
HP DesignJet 800 error code 56:10
I have an HP DesignJet 800 where the customer complained about white bands across the page. I ran a test copy and found that it seemed to be skipping...
