The past two months I have a printing issue with Kyocera Taskalfa 352ci.
Suddenly starting to prints too far down the page (leaving gap 4cm) No...
18 results in 0.0160 seconds.
-
KYOCERA TASKalfa352ci printing issue
-
Adjust print margins
Can we adjust print position/ print margins or leading edge and side to side registration adjustment in kyocera 5500i as we can did in Ricoh?
Kindly... -
Print Margins Imagepress C800
Hi,
Working with a image press c800 and the print margins on the spec sheet say this:
But when I print... -
C3351 - Image Shifted From Bypass Tray
Hello,
I have a brand new C3351 (Olivetti MF3301) machine works fine except for one thing: When printing from the bypass tray on A4 the... -
Xerox wc5645 margins alignment
Hello friends. I tried to adjust the margins of the wc5645 via the service panel of the machine but it only shows the setting for top edge. I also need... -
KM C258 Margins off / shifted
Hello all.
I have a KM C258 < 60 days old I'm working on with shifted margins. I've adjusted the leading edge and centering for all paper... -
Riso GR3770 Margins (think Master Making Problem)
Hi I have a GR 3770...and loaded it up with this drum that I forgot had given me problems in the past. Now suddenly I have an alignment issue with making... -
Problem with margins - Bizhub C220
Good afternoon,
This is my first post on this forum.
I need your help.
My Konica Minolta Bizhub C220 is with different... -
I have Toshiba eStudio25s and I have problems when I copy from ADF
I have Toshiba eStudio25s and I have problems when I copy from ADF
It doesn't copy with the same margins as the original is.
It crop the... -
Toshiba Estudio 351C Margins Adjust
Hi,
I need help with margin set, for individual paper size or individual paper cassette.
I change the 08-437 and 08-436, but... -
Margin Settings for Xerox DC3535
Hey guys... can u give me Settings for XEROX DC3535??... i had by changed it from default to 0, 0, 0, 0, for all side Margins... -
ir1023 lead edge way off
have replaced the image processor board. lead edge sensor. reflased the machine. any help anybody? -
MX-850 Shifting margins problem
Hey all, I got a MX-850 that randomly will shift the image on the copy. It will do this on the entire job...almost like the start of scan is off but,it... -
bizhub 500 cutting off margins
HI to everybody. Again from north Mozambique.
I have a bizhub 500 which suddenly started to cut off margins when copyng in a 2:2 mode. Odd the margins... -
[XEROX DC440] Problem with the margins
I have a problem with the margins. the copy goes out moved of 5 millimeters in comparison to the original one. how can I resolve this problem? which is...
