I've just run into this problem with lines being offset on my Z5400 that I'm trying to repair.
I recently oiled the rear carriage rod and...
15 results in 0.0186 seconds.
-
Z5400 bad vertical lines--broken and offset
-
konica minolta bizhub 658e doc feeder woes
I am h oping that someone else has ran into this. the doc feeder is so intermittently feeding that is sucks. I tried lowering the silver pin on the... -
Xerox C60 print strip
Hello,
On picture you can see strip in lighter color. I try to change: cyan color drum and cyan developer asm with new one because on test... -
Bizhub C350 - foggy strip on color prints
Hi everyone,
I have an old Konica-Minolta Bizhub C350, which is perfectly working with one exception: a foggy strip running from top to bottom... -
Riso EZ 230 the master comes out with this unique strip printed
When making the master only a central strip is burned in the master. It seems to me that it is not error of the TPH that are usually fine lines. The machine... -
Hp laserjet enterprise m775 mfp
Hello Everyone
This machine has "scanner failure" on the display. I checked the error log and it shows errors 30.03.45 and 30.03.23.... -
DR-G1100 scanner light strip
Sorry didn't know where to post this since I don't work on many scanners.
Wide strip middle of page (see samples). This happen after I was... -
Close printhead cover on DJ 500 (SOLVED)
So I walk up to a working 24" Designjet 500 to replace the trailing cables (the old ones were sagging and causing occasional carriage jams) and the... -
Problem with BHC 454
When printing the paper rubs with these parts of the fuser and the strip producing friction in the image
Thanks Gracias... -
Color laser jet m577. 59.F0.00
Got error wrong it 59.00.f0
No itb motor, this machine is completely different than previous boxes. . before I strip things down any body...Last edited by Wild Bill; 06-25-2018, 11:40 PM. -
CX510de - white strip
Hello,
I can not still find caution of printing white strip in black. See the attachment "testpage.pdf".
For example switching... -
HP DesignJet Z3200ps 87.10 error
Hello all,
I just had this Z3200 brought in the shop for an 87.10 error. The tech replaced the belt in the field, but I have been trying... -
Calibrate with ColorCal
Calibrate with ColorCal
ColorCal allows you to calibrate the Fiery Server without the use of a measurement instrument. Instead, ColorCal uses... -
SC 552-02 on a mpc3002
hi
i just got a call back for a mpc3002 that i checked out yesterday"sc 552-02 code"
I pulled the fuser unit and tested both thermofuses... -
encoder strip Epson WF-5620
Hi. I am trying to locate the encoder strip for the Epson Workforce Pro WF 5620. It does not seem to be near the geared belt as in other models? A diagram...
