-
-
Re: Konica c224 e can't access service mode
Use the code below to reset your password:
MFP Serial Number A5YN027000057
Reset Code RL2M7-N4JRZ-S6FB6-9ZJ38-XQRV5-CG8YD-EMZRG-AZTB5
You need to go to the same screen where you generated the request code, and below you should see "Input Reset Code".
There you must enter the code above (the bolded one).
If operation finishes successfully, machine should enter CE mode without asking for password this time.
For the next time to log-in CE mode you have to use default password.Comment
-
Re: Konica c224 e can't access service mode
claspoio, im sorry your life was so miserable you feel the need to smear pig shit all over this thread with your spamming bullshit just so you can feel better about your micro-penis and complete lack of social and emotional maturity.
might i suggest you stand up to your obviously sodomizing captor(s), fight back and try to make the rest of your life socially acceptable with some meaning other than being remembered as a neo-maxi-zoom dweebie.
oh, and get some salve for your obviously overstretched anus, its gotta sting by now no?
to the Admin of this forum, I may not be a founding member with 10+ thousand posts but i fucking care about this site and would like to keep at least this (konica) forum clean and free of garbage posts like this one.
ive reported spam and other bullshit posts\threads and on occasion they disappear but most times they stay like like crispy cum stains on a dark colored shirt.
i have years of experience of being a mod and later an admin of a vB BBS like this, we created a deadpool forum only visible to "staff" and we would move the offending posts to that hidden forum and kept the professionalism and welcoming demeanor without the occasional immature posts like this one.
we redirected (called out) members when they stepped out of line but we did it privately through PM after moving the offending post.
that being said, i find the rants and raves section as a chunky bloody 2nd trimester miscarriage on the floor of a public library for all to see.
im so ashamed at the behavior of some of the members here i dont allow myself to even view that forum anymore as i have blocked it in my browser.
does this site have a mission statement? if so id check the accuracy of what was intended vs what is going on.
i dont remember anyone at SMARKA ever attacking anyone personally like they do in the political (and other) threads here.
anyone that started any shit was banned or suspended until they learned to play nice with others even if they disagree.
i didnt want to say all this in a public forum but since it seems like this site is now a free-for-all with little or no moderation nobody probably gives a flying fuck to the left anyway...
prove me wrong please.
[edit] wow, that's the fastest ive ever seen a spammer removed and banned.
you have proven me wrong as to your attentiveness. i stand partially corrected!. [/edit]
[edit2] since the spam post is gone, please feel free to delete this post please if you found it too offensive.[/edit2]Last edited by Synthohol; 11-01-2023, 04:59 AM.We know a thing or two because we've seen a thing or two.
The medication helps though...Comment
-
Re: Konica c224 e can't access service mode
Hello, if you could please help us with 2 locked c308 machines, we would be grateful
First one is:
Printer Serial Number A7PU021208444
MAC Address 00:20:6B:B5:5E:8E
CE Password Reset Request Code: TJT4M-YX6UQ-JXZK7-ZPBD7-U75PG-CG8YD-EMZRG-EZDJP
Second one:
Printer Serial Number A7PY021002975
MAC Address 00:20:6B:A1:C9:CA
CE Password Reset Request Code: VPPRE-JHA7P-YC36P-R56W3-SW58T-GG8YD-EMZRG-EZDJZ
Thank you a lot for your time. We have been trying to unlock them through konica EU and they were offering no help, telling us to change nvram....Comment
-
Re: Konica c224 e can't access service mode
Reset code for the first one:
MFP Serial Number A7PU021208444
Reset Code H6V7L-5HG3F-9WV9U-GWRRA-J7PBZ-GG8YD-EMZRG-EZDJB
and for the second one:
MFP Serial Number A7PY021002975
Reset Code GE7VJ-7WWB2-CJW3D-V9HT6-VSDUY-CG8YD-EMZRG-EZDJX
--
RegardsComment
-
Re: Konica c224 e can't access service mode
Hi Jotunn, I bought a Bizhub 287 2nd machine from a customer. CE password has been changed before, please help me reset it, thank you very much.
Printer Serial Number A7AH047003106
MAC Address: 00:20:6B:3B:61:A9
CE Password Reset Request Code: RW79E-5FDGX-L3P8A-4VD8U-TGD3G-6G8YD-EMZRG-8YDP7
Regards.Comment
-
Re: Konica c224 e can't access service mode
^^^^^hero to the people, this guy!!^^^^^^^^^We know a thing or two because we've seen a thing or two.
The medication helps though...Comment
-
Re: Konica c224 e can't access service mode
To be more accurate, procedure looks like:
Reference
To perform the CE Password Reset:
1. Press Menu
2. Touch [Counter].
3. Touch the following keys in this order
Stop -> 0 -> 0 -> Stop -> 0 -> 1
4. On your input password screen, touch the following keys in this order
Stop -> Clear
> I'm genuinely curious what your idea of helping is
I'm gonna use tools intended for this task
Why use screwdriver as a hammer?
[ATTACH=CONFIG]51303[/ATTACH]
> I believe only Konica can use that information and even protech support doesn't fully understand how its decrypted, only that is has embedded SN and some other info
Yeah, that's right, however I heard that someone broke the encryption 2 or 3 years ago. For me it wasn't worth time and effort, the easier way was "to get where I shouldn't".
CAN YOU HELP ME PLEASE
serial number: A795121000076
MAC ADDRESS: 00 : 20 : 6B :B8 : C2 : DF ( i make spaces in the mac address because i get emoji face )
CE PASS CODE: U3RMQ-5Y4RN-FX4DU-CS8ZV-JKPQ5-GG8YD-EMZRG-8YDHT
THANK YOU
WhatsApp Image 2023-12-07 at 5.42.33 PM.jpgXerotk.com
xerox copier technicianComment
-
Re: Konica c224 e can't access service mode
thank you for fast helpXerotk.com
xerox copier technicianComment
Comment