C450i, installing FS-533

[copyman]

Going to install FS-533 (inner finisher) on this C450i but install instructions shows MK-607 which is a fan assembly to be installed as well. Can the FS-533 be installed without this MK? It's going to be in a very low volume office. Thanks

[Synthohol]

there are no footnotes on the price sheet for the fs-533 that show it requires anything else. no kits needed.
if you have access to mkm the .xls spreadsheets with price and compatibility are very helpful.

[copyman]

there are no footnotes on the price sheet for the fs-533 that show it requires anything else. no kits needed.
if you have access to mkm the .xls spreadsheets with price and compatibility are very helpful.

See attached pics install instructions

[Synthohol]

on the current configurator https://configuratorp.kmbs.us/#/buil...c450i-71-c450i the 533 is not even an option anymore.

[4Toon]

We do install the fans here. I have not tried it without it, but I assume it is there due to the higher heat of the fuser, which could cause plastic to warp.

[tsbservice]

It's mandatory kit according to my docs.
We also didn't tried without fan...it may work but who knows.

[copyman]

Thanks everyone. I'm going to test without while in my shop just to see if it even works. But will add fan before installing machine at customer.

[tsbservice]

Thanks everyone. I'm going to test without while in my shop just to see if it even works. But will add fan before installing machine at customer.

That's wise decision.

[copyman]

That's wise decision.

Ha-ha , last thing I want is a "meltdown"