Had a customer contact our install guy, they received a 20amp machine, wanted to know if they could just
bend the plug to make it fit a "regular"...
13 results in 0.0103 seconds.
-
Bend the plug, it will fit!
-
P 502, drum not set
Firstly, suspected pcdu, swapped with working pcdu, still the same. Tried pcdu reset.
Fitted 2 new connetors, as tend to bend when forced.
... -
MPC 3003 scanner section bend
Hi friends, the problem is MPC 3003 scanner section bend because of some heavy thing fall down on top of the machine when ADF is not there so the home... -
958 ADF lid not closing securely
Anyone have the 958/C658 ADF not holding the Left panel assy door closed enough?
it works find if you push down on it so the gears mesh better.... -
Canon IR3025 paper from first tray getting bend
In my canon ir3025, paper from first tray getting bend. i have changed the pickup roller yet the issue happens. i have attached the folded paper photo.... -
IR 4570
11 x 17 bend in the end of the page with legal works fine and letter too -
tosh e-studio 160 part number
Is their anybody out in Copier land who could kindly provide me with the part number for a e-studio 160 hot roller drive gear (the one actually on the... -
MR
Hi I have a MP9000 which i had install a new HHD unit into but the mashine does not pick up the new HHD unit so that it can be formated i have tride everything... -
Ricoh "digital Duplicators" for sale
A church customer of mine in So Bend, IN area has 2 Ricoh dig. dupl.s for sale. Any one interested? They have 6 color master/drum units. -
AR-336 Error code e7-00
this machine has been beat on and not taken care of, intermittantly I get a E7-00 error, the rest of the time it does'nt appear to be scanning anything... -
canon np6050
I am not a tech. I am a member of a really small volunteer fire department was was donated a canon np6050 printer with no documents at all.
I am... -
Panasonic FP 7742
Hi
I am experiancing a error that is E5-01 which indicates that it is a VP (+24V) line error.
My question is if there is a board diagram... -
Sharp arc-150
Working on a sharp arc-150-with code uo-80 had problem before removed and re-set connectors problem went away.anybody know the fix for thar codeThanks...
