11 results in 0.0136 seconds.
-
mx-4071 please wait when entering settings on home screen
Please wait is stuck there when trying to enter settings. I replaced the emmc (lost address book) Why? Please wait still there. Checked for staples or... -
DSPF hinge stops
I looked through every model DSPF to look for the metal plates on the back of each hinge to stop the feeder raising to 12 o'clock. Looks like you get... -
Double feed DSPF MX5071
We are having a lot of clients who report double feeds from the DSPF.
Rollers have been swapped, torque limiter too, but even brand new machines... -
DSPF 2 to 2 lead edge is way off side 1 only
Have an mxm365 with the DSPF. On single-sided copies through the feeder registration is dead on. When doing 2 to 2 copying, side 1 is way off. There... -
MX-4141 E7-11
Hi Guys,
I'm feeling rather out of my depth with a MX-4141N I'm dealing with. It's currently facing an E7-11 error. I've gone through and... -
Sharp MX 4050- Feeder problem
Hello Guy's and Gal's hope you guy's can help
Have this machine and cust says that feeder does not recognize size nor the paper when they... -
MX5141 E7-11
Got a MX5141 roughly 200K poping an E7-11 every time you go into copy mode or scan mode. We have replaced the SCN PWB and LED PWB on the scan unit. Still... -
Sharp AR-M351U Back Scan blurr
I had Sharp AR-M351u photocopier with CIS unit for scanning the back of a document and CCD for scanning the front in a 2-2 scanning. Fortunately, the... -
LOAD 11x17 paper
hello guys i am trying to help some other techs here with a problem on a MX-350N copier, the problem, ther are using 8 1/2x11 and 8 1/2x14 paper in the... -
CQ issue in hercules machines
while doing back to back copy thro DSPF first side copy is very clear.
second side only rear end is giving black back ground.front side is clear.... -
Im3511 dspf 9290
Hi All,
I'm having a few problems with the doc feeder on the im3511 machines,
if you place a original in the feeder the original is...
