50 results in 0.0245 seconds.
-
M5526 - Transfer Cleaning
We've had real issues with this model with the transfer cleaning section, it either seems to block up with toner which rounds off the shaft the driver... -
part number question
Does anyone know the part number for the grease used on the drum drive shaft? -
Dinosaur Part? - c650
I was going to post my fix of the toner drive section repairs just for fun as these machines are all but extinct. However, my last pair of drive units... -
Canon ImagePrograf TM-305 Plotter squeaking noises coming from carriage
I have 1 that is squealing after a few weeks from when I cleaned it last and the noise was removed but it comes back again in a month. Does the carriage... -
Konica Cxx4e Series Jams 11-01 and 11-02 (Tray 1)
Hello everyone !
Have been refurbishing some Cxx4e Series and after 500 pages +/- (on client site) ... machines are starting jamming (1101 and 1102). -
canon lbp6300 breaking toner cartridge drive shaft
I have a lbp6330 that keeps breaking the drive shaft on the toner cartridge, this machine has done it 3 times. After shaking the cartridge and spinning... -
Canon IR 5000 exit roller replacement
Can anyone advise me on the best way to replace the paper exit roller (shaft with 6 rubber rollers just left of heat fuser) Photo attached?... -
Epson ET-5170 rear paper feed/rear door assembly
Paper feed shaft has a broken pin that formerly was attached to the paper feed gear. Gear is now free wheeling on paper feed shaft. Unknown if individual... -
pm kit for konica minolta C7000 C6000 C6501 C5501 C6500 +extras all OEM
PLUS EXTRAS fuser belt ,fuser gears ,shaft seperating plate , adu actuators
Konica minolta PM kit C6000 C7000 C6501 C5501 C6500 + bonus extras... -
Another weird out of the box problem. MJ-1109
Must be the week...
MJ1109 + hole punch & 3515AC.
Everything went fine until I checked the hole punch & staple. paper made... -
mpc4503 gear drive on right door.
greetings
As I waited for a transport guide to arrive I went back to account to change the top transort swing plate to find customer
broke... -
7255 missing Drum drive gear
Hi All.. Helping out a friend with a 7255 that is jamming under the drum unit. Paper gets about 2 inches past the sep block and comes up with a J31-02... -
C754e jam code 1102
Replaced pickup , feed and separation rollers. Cleaned sensors, pulled one way clutch off and cleaned clutch and shaft. Still jamming. Thanks -
Ricoh MP2501 Trasfer roller
Hi,
Basically we're KonicaMinoltra techs. Happens to have work on couple of Ricoh MP2501s. There were some copy quality issues, checked the transfer... -
Xerox D125 Toner faulse readings
Every toner i install does few copies
Before installing another new toner, remove the toner dispensing unit. Remove the toner bottle motor. Clean...
