Altalink 80XX Series special Altboot method

[hnami]

Re: Altalink 80XX Series special Altboot method

Try with usb port on back side of machine

[xcopytech]

Re: Altalink 80XX Series special Altboot method

Try pws altboot

[hnami]

[hnami]

Re: Altalink 80XX Series special Altboot method

hello to friends
is everything ok?
Does anyone have any questions?

[hnami]

Re: Altalink 80XX Series special Altboot method

Thanks for sharing that diagram! Now, as for restoring a corrupt SD, I have personally not been able just yet to clone a SD from another AltaLink.


Sent from my iPhone using Tapatalk

hi my ferind
to clone sd card or restoring sd image use "ACTIVE DISK IMAGE" software i put the link in forum that is free to install
also you dont neet to anoder sd card i puted link of sd card images on forum
goodluck

[hnami]

Re: Altalink 80XX Series special Altboot method

active disk image software download link

https://dl2.soft98.ir/soft/a/Active.Disk.Image.Professional.23.0.0.x64.rar?1709505477

[janik123]

Re: Altalink 80XX Series special Altboot method

What have you done?
Install full software with special altboot?

I did but the machine didnt take it and after inicializating software it restarted, then black screen appear u can wait 1 hour and nothing will happen. sd card was flashed with c8055 software, new hdd installed, my guess is could it be faulty pwb?

[xcopytech]

Re: Altalink 80XX Series special Altboot method

Did you flash SD card with new file from xerox or with image from another machine?
What software level have you tried to install?

[hnami]

Re: Altalink 80XX Series special Altboot method

I did but the machine didnt take it and after inicializating software it restarted, then black screen appear u can wait 1 hour and nothing will happen. sd card was flashed with c8055 software, new hdd installed, my guess is could it be faulty pwb?

try replace hdd and perform forced upgrade

[hnami]

Re: Altalink 80XX Series special Altboot method

I did but the machine didnt take it and after inicializating software it restarted, then black screen appear u can wait 1 hour and nothing will happen. sd card was flashed with c8055 software, new hdd installed, my guess is could it be faulty pwb?

i so have de same problem check cpu cooling

[janik123]

Re: Altalink 80XX Series special Altboot method

i so have de same problem check cpu cooling

hey guys i would apprieciate if one of u could talk to me its better if we discuss this over the phone i will give u my email adress write me there jgira@dd21.sk

[janik123]

Re: Altalink 80XX Series special Altboot method

I did but the machine didnt take it and after inicializating software it restarted, then black screen appear u can wait 1 hour and nothing will happen. sd card was flashed with c8055 software, new hdd installed, my guess is could it be faulty pwb?

same problem with me too

[adriansto]

Re: Altalink 80XX Series special Altboot method

same problem with me too

What software version do you try to reload?

[hnami]

Re: Altalink 80XX Series special Altboot method

same problem with me too

Try first reload 101.xxx version altboot

[Ricardo_Reis]

Re: Altalink 80XX Series special Altboot method

Correctemundo. I have the Special Altboot for the C8070. It consists of a 'swup_usb' file (83 kb) and a 'swup_usb.C8070' file (zero kb). I'm wondering if I could rename the latter to make it work for the C8030/35 and C8045/55 as well, since the file itself is empty.

Here are the SpecialAltboot files for the altalink C80xx B80xx family

C8070 https://mega.nz/file/5d1WjByb#bAzQtH...Xph13O-NMdUsO0

C8045_55 https://mega.nz/file/dZ8QFSDS#JJlyZ4...2mzJokX7cyCi7c

C8030_35 https://mega.nz/file/FEcWHBLL#Ivh0DT...O-50XGJIMCZqrM

B8045 to b8090 https://mega.nz/folder/EMFSnSSI#hZoI_L7rMepP2T_cpV4yDg