Hi folks ,
bizhub c364e stuck on 4 bars. Installed new SSD and fresh firmware- same result , Dimm was changed no luck again. Installed...
Search Result
Collapse
12 results in 0.0128 seconds.
Keywords
Members
Tags
-
Bizhub C364e stuck on for bars
-
Ricoh SP C262SF Lines on copies only when using ADF: the slit glass is clean
Hello, getting lines on copies when using the ADF but not from the glass.
Please see the picture.
The slit glass is completely clean. ... -
Dimmable LED's
I've been putting this off for a while because I didn't want to open up this can of worms. Yesterday, I decided to bite the bullet and upgrade my pool... -
MX-6070 Cycling Power
Have a MX-6070 that constantly cycles power. The screen remains blank the entire time while the machine boots up and then powers back down. On the SCN-MFP... -
Bizhub 284e PWB problem
Hello,
I have problem witch a61fh02001 PWB.
Motherboard not standup normally, the leds are off.
Anywone know what the problem is? -
4820W color scanning issue
New style scanner. When color scanning to a pc the image has two vertical yellow bands on the right side. The yellowing corresponds to scan LEDs 4 and... -
Bh550i no screen, no LEDs, only motors
Good morning all.
A colleague is checking out a 550i with a black screen, no leds and only the motors can be heard running.
... -
Bizhub C452.. No network
I know many of you would have think WTF.... Got this C452 with a bad MFP board.... Had a complete set of boards from a dumped C452 and tried to salvage... -
C458 with blue LEDs below control panel lit all the time
Gentlemen
I purchased this recently. I made sure there were no jobs in the que. When I boot the machine up the LED is off until it is ready to... -
KJEpps started a topic DesignJet Z6200 Blank Screen after replacing Trailing Cable / Ink Tube Assemblyin HPDesignJet Z6200 Blank Screen after replacing Trailing Cable / Ink Tube Assembly
Confirmed that the printer had the reported error of 86:01 (Carriage Servo Shutdown) that wouldn't clear. During troubleshooting I noticed that there... -
Dead MX-6240N
One moment I was printing the 22-6 and then exiting sim mode the mfp locked up. After hard cycling power the screen is black and the green main power... -
CLX-9251 wont connect to network
Hi,
I have an issue with a clx9251, it wont connect to customers network I also tried with a laptop & crossover cable, no luck. I don't...