I need a little help finding settings on a KM5035.
Tray 2 is set for printing only. If you select tray 2 in copy mode you get the message...
19 results in 0.0162 seconds.
-
KM5035 tray 2 settings
-
how configurate the scan???? KM 3035,4035,5035??????
I have 3 models of Kyocera km 3035-km5035 and I have a problem when I tried to configure the scan mode. I entered the correct password and then pushed... -
KM 5035 Resetting drum and dev counts
I'm trying to remember how to reset the drum and dev counts on a KM5035. The book says to press the reset key then the print key after you are in the... -
KM5035 not adding toner
I am fighting a 5035 that will not add toner.Toner sensor in developer reads empty, but the solenoid will not activate.The solenoid will activate with... -
KM5035 bypass jams 3 inches past feed roller
Got a problem with the bypass. It starts to feed then a loud grinding noise is heard then it stops. I thought it could have been a gear mesh problem with... -
Km5035 won't go past please wait screen
I haven't been to the machine yet (70 miles away), but the customer says it won't go past the please wait screen on warm up. Cycling machine off and on... -
I am stumped km5035
hello all
I have an km-5035 giving me some trouble. I am getting gray streaks on the front side of machine. I have replaced the drum unit, dev... -
KM5035 Finisher Problem. PLZ Help!
When the staple feature is selected, the display reads "these functions cannot be combined." However, no other function or feature is selected.... -
kyocera 5035 code o630
I have a KM5035 that is throwing this code[0630] "only when the finisher is asked to staple to the left side of the page"???[did the 906 reset]... -
KM-5035 print queue
Is there a way to see and possibly manage the print queue from the copier? I can only see current print job.
Print jobs are sent via network... -
KM5035 Creasing A4R
Hi guys
As mentioned i have a KM5035 creasing copies only when printing on A4R paper. For the life of me i cant figure this one out. I've... -
KM5035 Noise
Has anyone come across the noise in a 5035 when it get up to near the 1,000,000 mark??
I put new clutches and gears on and greased the shafts (duplex... -
km5035
Hi! i need help again please ? copier shown J83 intermitent when make copied with staple .With DF71E attached.THANKS FOR A
NY SOLUTON SUGGESTED... -
Kyocera KM-5035 Question
Is there a way to send a copy of an outgoing fax to an email address using a KM-5035? I know that Sharp's document administration feature lets you do... -
KM-5035 Scan Question..... Probably simple!
On a 5035 with print and scan boards our IT guy always saw a FTP selection when you pressed the scan key, we have 2 machines here that when you press...
