Please kindly help your on reset code. Thank you very much
Konica c224 e can't access service mode
Collapse
X
-
Dear Jotunn Please help me with reset code for a bizhub C308, I don't remember the password to access the service mode.
Attached FilesComment
-
A previous tech must have changed the service password. I have tried 9272 4 times and twice, 12345678 all that were suggested on the internet and then I'm allow me into the service mode. Is there any way to bypass the password or reset it. I have a c- f a14 code and need to get into the service mode to take care of it but I can't get past the password. ThanksComment
-
Your reset comes back as expired because the date in the copier is not set properly. You will need to set date and time properly and get back with the updated reset information.
image.pngA Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...Comment
-
How login into administrator to change the time and dateAttached FilesComment
-
Your reset comes back as expired because the date in the copier is not set properly. You will need to set date and time properly and get back with the updated reset information.
image.pngComment
-
If you don't have the Admin password either, you may need to go the nuclear route and use the reset tool (a789be.tar) on the machine. I can't currently think of any other way to change the date and time without the administrator or Service passwords.A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...Comment
-
-
Comment
-
not even a please?
*chuckles to self*
sorry i laughed, the reset file is a brickmaker if you dont follow the procedure exactly like having FW ready, the correct dipswitch settings etc.. and in some cases boot firmware.
just be careful if not familiar with the procedure.
We know a thing or two because we've seen a thing or two.
The medication helps though...Comment
-
Can you email me the link please adetutu.busayo6@gmail.comComment
-
not even a please?
*chuckles to self*
sorry i laughed, the reset file is a brickmaker if you dont follow the procedure exactly like having FW ready, the correct dipswitch settings etc.. and in some cases boot firmware.
just be careful if not familiar with the procedure.Comment
Comment